You can set the date and time to display on the LCD screen.
•Before you use the “Date/Time Display” function, you must set the date and time. page 34
settings | contents | |
Off | Current date and time information is not displayed. | None |
Date | Displays the current date. | 01/JAN/2009 |
Time | Displays the current time. | 00:00 |
Date & Time | Displays the current date and time. | 01/JAN/2009 00:00 |
•The date/time will read “01/JAN/2009 00:00” in the following conditions: - The
•This function depends on the “Date Type” and “Time Type” setting.
•You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions.
•Pressing the Control button ( ) will brighten the screen whereas pressing the Control button ( ) will darken the screen.
•A brighter LCD screen setting consumes more battery power.
•If you adjust the LCD brightness when the ambient lighting is too bright, it is hard to see the monitor indoors.
•The LCD Brightness feature does not affect the brightness of images to be stored.
•You can adjust the LCD Brightness from
STBY 0:00:00 [475Min]
9999
LCD Brightness
0
Exit Adjust OK
•You can change the colour impression of the screen with a variety of colour options by adjusting the red and blue colour range.
•When you set red and blue colour range, the higher the figures, the brighter the LCD screen will be.
•You can adjust the LCD colour (red/blue) from
STBY 0:00:00 [475Min]
9999
LCD Colour
Red 0
Blue 0
• You can manipulate the colour displayed on the LCD screen by adjusting the colour ratio | Exit | Move | OK | |
|
|
| ||
| of red and blue. |
|
|
|
• | Adjusting the colour display of LCD screen does not affect the image to be recorded. |
|
|
|
• | Higher the value will produce brighter LCD screen when adjusting colour range of red and blue. |
|
|
|