Samsung SMX-K40LP/EDC manual Preparation, Attaching the Grip Belt, Attaching the Core Filter

English_15

preparation

This section provides information that you should know before using this camcorder: such as how to use the provided accessories, how to charge the battery, and how to setup the operation mode and initialise setup.

ATTACHING THE GRIP BELT

Adjust the length of grip belt so that the camcorder is stable when you		1	2
press the Recording start/stop button with your thumb.
	Please note if the hand strap is adjusted too tight and you use
WARNING	excessive force to insert your hand, the hand strap hook of the
	camcorder may be damaged.

ATTACHING THE CORE FILTER

Attach the core filters to the cables. The core filter reduces interference.

1.To open the core filter, release the stoppers on both ends of the core filter.

2.Attach the core filter to the cable near its connecter as shown in the diagram.

3.Close the core filter until it clicks shut.

•Take care not to damage the cable.

•When connecting a cable, attach the end with the core filter to the camcorder.

ADJUSTING THE LCD SCREEN

1	2	a USB cable	Core Filter	3
		Wind the cable so that it is not slack.
Stopper		a mini HDMI cable

The wide LCD screen on your camcorder offers high quality image viewing.

1.	Open the LCD screen with your finger.
2.	• The screen opens up to 90°.
	Rotate the LCD screen towards the lens.
	• You can rotate it up to 180° towards the lens and up to 90° backward. To view recordings	~
		{
		vu
		vmm
	more conveniently, rotate the screen by 180° towards the lens, then fold it back to the body.

Excessive rotation may damage the connective hinge between the screen and the

WARNING camcorder.

•When the LCD screen is rotated by 180°, the left and right sides of the subject are shown in reverse, which produces horizontally flipped image.

•Remove fingerprints or dust on the screen with a soft cloth.