Netcam(W)_SNC-L200(W)

Safety Precautions

Netcam(W)_SNC-L200(W)

Important Safety Instructions

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates high voltage is presentinside. It is dangerous to make any kind of contact with any inside part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Important Safety Instructions

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings.

8.

Install in accordance with the manufacturer ’sinstructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus

 

(including amplifiers)

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.

This device complies with part 15 of the FCCRules. Operation is subject to the following two conditions.

1)This device may not cause harmful interference, and

2)This device must accept any interference received, including interference that may cause undesired operation.

Class B

NOTE :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can reaiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit defferent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer ’s instructions.

RF Radiation Exposure Statement

This equipment complies with FCC RF Radiation Exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

2

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs,

11.

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer,or sold with the apparatus. When a used, caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Declaration of Conformity to R&TTE Directive 1999/5/EC

This equipment fulfils the R&TTE directive(Council Directive 1999/5/EC). - European States qualified under wireless approvals:

EU

Austria, Belgium, Denmark, Finland, France (with frequency

 

restrictions), Germany, Greece, Ireland, Italy, Luxembourg, The

 

Netherlands, Portugal, Spain, Sweden, and the United Kingdom

Accept EU

Iceland, Liechtenstein, Norway, and Switzerland

- European States with restrictions on use:

EU

In France,the frequency range is restricted to 2446.5-2483.5 MHz for

 

devices above 10 mW transmitting power such as wireless.

Accept EU

No Limitations at this time.

NOTE :

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.? SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

3

Page 2
Image 2
Samsung SNC-L200(W) user manual Safety Precautions, Important Safety Instructions

SNC-L200(W) specifications

The Samsung SNC-L200(W) is an advanced surveillance camera designed to deliver high-quality video surveillance solutions for a variety of applications. This camera is part of Samsung's SNC series, which is known for its reliability, versatility, and cutting-edge technology.

One of the standout features of the SNC-L200(W) is its powerful 2-megapixel resolution, which provides clear and detailed images even in challenging lighting conditions. This high-resolution capability ensures that users can capture critical details in the footage, making it ideal for security surveillance in businesses, public venues, and residential areas.

The camera is equipped with advanced low-light performance technology, enabling it to produce clear images even in dark environments. This is achieved through the integration of infrared (IR) illumination, allowing the SNC-L200(W) to function effectively during night time or in poorly lit areas. The IR capabilities extend the operational range of the camera, ensuring comprehensive coverage regardless of the time of day.

Another notable technology incorporated into the SNC-L200(W) is the Wide Dynamic Range (WDR) feature. WDR enhances image quality in scenes with both bright and dark areas, providing balanced illumination and ensuring that no important details are lost due to glare or shadows. This feature is particularly useful in environments such as entryways and parking lots where lighting conditions can vary dramatically.

The SNC-L200(W) is designed with a robust and weather-resistant housing, making it suitable for both indoor and outdoor installations. It adheres to the IP66 standard for dust and water resistance, ensuring that the camera remains operational in various environmental conditions.

User-friendly features such as remote access and mobile compatibility elevate the SNC-L200(W)’s functionality. Users can monitor live feeds and access recorded footage from smartphones or computers, providing flexibility and convenience in security management.

Additionally, the camera supports various video compression formats, including H.265 and H.264, which optimize storage and bandwidth usage without compromising image quality. This feature is essential for enterprises looking to implement cost-effective security solutions while maintaining high standards of surveillance.

In summary, the Samsung SNC-L200(W) is a versatile and high-performance surveillance camera equipped with essential features such as high resolution, low-light capabilities, WDR technology, and mobile access, making it an ideal choice for any security application. Its durability and advanced technology provide reliable performance, ensuring peace of mind for users.