Samsung SNC-L200(W) user manual Access to NetcamW via a cell phone USA Only, 160x120 320x240 Help

Netcam(W)_SNC-L200(W)

Access to Netcam(W) via a cell phone (USA Only)

You can view still images of Netcam(W) by accessing the Internet via a cell phone. Enter http: //Global_IP address (or domain name): port number/wap. htm on the URL page of the cell phone, and press the OK button.

(ex) http://wfffbbb.websamsung.net:8080/wap.htm

-Enter the user name and password when the authorization window appears, and press the OK button.

DISPLAY MODE

< Main Page >

- 160x120

- 320x240

- Help

< Help Page >

Explains camera operations.

- Button 1: Displays the main page.

- Button 2/4/6/8: Controls the Pan/Tilt.

- Button 5: Refreshes still images.

- Button 7: Turns On/Off the flash.

- Button 9: Turns On/off the PIR sensor.

Netcam(W)_SNC-L200(W)

< View and Control Images >

- You can view images without the authorization process when the “Access Limitation Configuration” of the Smart Viewer settings is

Warning set to “Full Access.”

-The authorization process does not appear again after an initial authorization if you store the ID/Password in the cache during mobile phone settings.

-Communication service providers available are listed below (as of August, 2005).

*Cingular

*Sprint

*T-Mobile

-Connection to or control over SNC-L200(W)may not work, depending on the communication service provider, mobile phone’s model or firmware version, area and/or wireless network operator, or for other reasons.

72 73