3-3 LED Indications

3-3-1. LED Indications

: Light is Off / : Light is Blinking / : Light is On

LED

STATUS

 

 

The battery is being charged.

The battery is completely charged.

The projector shut down automatically because it exceeded the maximum operating temperature.  (The LED blinks at one second intervals.)

Refer to Action 1 in Clearing Indicator Problems below.

The cooling system (including the cooling fan) inside the projector is not working normally.  (The LED blinks twice at one second intervals and then stays off for two seconds.)

Refer to Action 2 in Clearing Indicator Problems below.

The LED start-up board of the projector is not working normally.

Refer to Action 3 in Clearing Indicator Problems below.

The battery needs to be charged.

3-3-2. Clearing Indicator Problems

CLASSIFICATION

STATE

MEASURES

 

 

 

Action 1

The internal temperature of the

• Restart the projector. If the same problem occurs continually,

projector increased abnormally.

contact your product distributor or service center.

 

 

 

 

 

The cooling system (including the

• Move the projector to a cool place, let it cool sufficiently, and then

Action 2

cooling fan) inside the projector is

turn it on again. If the same problem occurs continually, contact

 

not working normally.

your product distributor or service center.

 

 

 

Action 3

The LED start-up board in the

• Restart the projector. If the same problem occurs continually,

projector is not working normally.

contact your product distributor or service center.

 

 

 

 

This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may produce noise, This does not affect product performance and is part of normal operation.

3-3

Using

Page 30
Image 30
Samsung SP-H03 user manual LED Indications, Clearing Indicator Problems, LED Status, Classification State Measures