Samsung SP-L301, SP-L351, SP-L331 Network Management, Management using the Web Browser

3-6 Network Management

3-6-1. Management using the Web Browser

The Web Browser lets you monitor and control one projector from a PC without installing any software. Before you can use the Web Browser, you must connect your projector to your local area network. For directions explaining how to connect to a network, see section 2-20, Connecting to a Network.

To control multiple projectors from a single PC, install and run Samsung Projector Manager.

For information about Samsung Projector Manager, go to 3-6-2.

Check the network connection between the PC and projector before connecting the Web Browser. If the network connection (see section 2-20, Connecting to a Network) has failed, the Web browser window may not be available for use.

•To use the Web Browser, your PC must meet the following minimum system requirement :

•<RAM>: More than 10MB

•<Hard Disk> capacity: More than 10MB

•Display resolution: More than 640 x 480

•Supported OS : Microsoft Windows XP, Windows Vista

•Web browser : Microsoft Internet Explorer 6 or later version, Netscape Navigator 9 or later version, Mozilla FireFox 3.0.x or later version, Google Chrome.

1.Connecting

•Enter the projector's IP address into the web browser address bar.

You can see the projector's IP address by pressing the Menu button and selecting Setup>Network>IP Setting.

•The Network Projector window appears. For information about control items in the Network Projector window, refer to the items under Section 3-5, Using the Screen Adjustment Menu.

•Some functions listed in 'Using the Screen Adjustment Menu' cannot be used in the web browser because of limitations in remote control by the network.

Using 3-6