Samsung SPN4235 manual User Instructions, Table of Contents

Important Warranty Information Regarding Television Format Viewing

Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature and con- stantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non- expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally,viewing other stationary images and text such as stock market reports, video game displays,station logos,web sites or computer graphics and patterns,should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle,but permanent burned-in ghost images in the PDP picture.To avoid this,vary the programming and images, and primarily display full screen moving images,not stationary patterns or dark bars. On PDP models that offer picture sizing features,use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use,as well as burned-in images, are not covered by your Samsung limited warranty.

User Instructions

Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 40 of this manual to reduce the degree of brightness and contrast of this screen when displaying a still image.

Cell Defect

The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit.

Altitude

The PDP will not operate normally at altitudes above 6500 ft.

Table of Contents

General Information
Your New Plasma Display Panel	10
Remote Control Buttons	12
Wall Installation Instructions	14
Connections
Connecting VHF and UHF Antennas	20
Connecting Cable TV	21
Connecting Speakers	23
Connecting a VCR	24
Connecting a Camcorder	25
Connecting a DVD Player	26
Connecting a DTV Receiver	27
Operation
Turning the PDP On and Off	30
Memorizing the Channels	32
Setting Up Your Remote Control	37
Picture Control
Customizing the Picture	40
Using Automatic Picture Settings	41
Selecting the Color Tone	42
DNIe (Digital Natural Image engine)	43
Viewing the Picture-in-Picture	44
Changing the Screen Size	50
Freezing the Picture	51
Sound Control
Customizing the Sound	54
Using Automatic Sound Settings	55
Choosing a Multi-Channel Sound (MTS)Soundtrack	56
Using the Auto Volume	57
Using Dolby Virtual	58
Using a Subwoofer	59

Channel Control
Fine Tuning Channels	62
LNA (Low Noise Amplifier)	63
Connecting a PC and Operation
Connecting to a PC	66
Adjusting the PC Screen	70
Changing the Position of the Image	71
Changing the Size of the Image	72
Information	73
Picture Quality Adjustment	74
Time Setting
Setting the Clock	78
Setting the Sleep Timer	79
Setting the Timers	80
Setting the Preferred Channel and Volume Level ....	82
Function Description
Selecting a Menu Language	84
Viewing Closed Captions	85
Digital Noise Reduction	86
Setting Auto Power Off	87
Using the V-Chip	88
Selecting the Film Mode	94
Appendix
Troubleshooting	96
Care and Maintenance	97
Specifications	98

6 7