3
4
Check that the locking device is set to “OPEN”.
• Water is only dispensed if the device is set to “OPEN”.
Place a cup on the cup support, then press the PUSH lever.
OPEN LOOK
OPEN LOCK
INSTALLING A REGULAR BOTTLE
1 | Press the fixing lever, lift the exclusive water tank |
upwards, then remove it. |
2
3
Note
Remove the water supply device from the exclusive water tank, then set the inner groove of the water supply device in a regular spring water bottle and fix it in position by turning it.
Turn the water supply device over, then fix it in position in the fixing hole.
•If you do not want children to use the dispenser, set the locking device to “LOCK”.
•Gurgling sounds may be heard when air enters the water tank from regular mineral water or beverage bottles.
•Some regular mineral water or beverage bottles may not fit the water supply device, depending on their size.
•If water does not come out satisfactorily when you press the “push” button, press it again.
•Do not use carbonated drinks, such as cola, cider or sodas. When you press the button, the beverage may spurt out due to the pressure of carbonic gas accumulated in the upper part of beverage bottle.
•Use bottled mineral water or boiled tap water that does not contain any particles.
12
