SRP-370/372 Ver.2

2. Self Test

The self-test checks whether the printer has any problems. If the printer does not function properly, contact your dealer. The self-test checks the following;

2-1 Make sure paper roll has been installed properly.

2-2 Turn on the power while holding down the FEED button. The self-test begins.

2-3 The self-test prints the current printer status, which provides the control ROM version and the DIP switch setting.

2-4 After printing the current printer status, self-test printing will print the following, and pause (The PAPER LED light blinks).

Self-test printing.

Please press the FEED button

2-5 Press the FEED button to continue printing.

The printer prints a pattern using the built-in character set.

2-6 The self-test automatically ends and cuts the paper after printing the following.

*** COMPLETED ***

2-7 The printer is ready to receive data as soon as it completes the self-test.

Rev. 2.01

- 20 -

Page 20
Image 20
Samsung SRP-372 user manual SRP-370/372 Ver.2 Self Test, Self-test printing Please press the Feed button, Completed