Samsung SRP270AP, SRP270CPG user manual Serial Interface

									SRP-270
3-1 Serial Interface
SW			FUNCTION					ON	OFF	DEFAULT
1	Emulation Selection						Refer to the following			OFF
2								table		OFF
3			Auto-Cutter				Enable		Disable	OFF
4		FONT SPACE					2		3	OFF
5			Function for							-
6										-
	Service Engineer
7										OFF
8			Buffer size				40Bytes		4KBytes	OFF
			DIP switch Setting			1 Function
SW – 1				SW – 2					MODE
OFF				OFF					EPSON
OFF				ON					Citizen
ON				OFF					Star
				Emulation Selection
									OFF
SW			FUNCTION					ON		DEFAULT
1		Auto Line Feed					Always		Always	OFF
							Enabled		Disabled
2	Hexadecimal dump							YES	NO	OFF
3		Hand Shaking					XON/OFF		DTR/DSR	OFF
4			Word length				7 bits		8 bits	OFF
5			Parity check				Enable		Disable	OFF
6		Parity selection					EVEN		ODD	OFF
7	Baud Rate selection						Refer to the following			OFF
8								table		OFF
			DIP switch Setting		2 Function
Transmission speed				SW – 7					SW – 8
19200 BAUD				ON					ON
2400 baud				OFF					ON
4800 baud				ON					OFF
9600 baud				OFF					OFF
				Baud Rate selection

※NOTE

When the word length is 7 bits, you can not parity check OFF status.

Rev. 1.00 - 16 -