e-11e-10

f. Speaker
It outputs the sound signal which was transfered from the monitor.
PIN configuration of the PIR CAMERA is the same as the STANDARD
CAMERA.
But, PIR CAMERA does not provide ALARM JACK.
2) INSTALLING STANDARD CAMERA (SOD14C)
SOD14C s camera can be attached to the wall, ceiling or shelf using the camera mount bracket
(SBR-110).
Choose an installation site that can sufficiently support the weight of the equipments to be installed.
Attach the camera mount bracket to the wall or ceiling using the supplied three screws (M4 X L15).
Adjust the camera to target the video location and tighten the bracket handle on the camera mount
bracket.
M4 x L15 sized screws
wall or ceiling
3) PIR Camera composition
Lens
It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide
area.
Speaker
It outputs the sound signal which was transfered from the monitor.
Fresnel Lens
An infrared focusing lens for increasing the sensitivity of the built-in PIR sensor.
3
5
4
1
2
<Top> <Bottom>
00403A SSC-17TQ_ENG 10/9/03 11:30 AM Page e-10