SSC21WEB-1 2004.8.25 5:38 PM Page 31
5)After setting, move to the main screen by using the MENU BOTTOM.
6)Set values will be stored shown below. It takes 2 or 3 seconds.
06/01/03 | 13:14:00 | [S] 06/01/01 | 13:14:00 |
NETWORK SETTING
CAM1
On completion of setting to Static IP(Fixed IP)setup, the screen, [S] is displayed. If the network connection is cancelled or cut, [S] starts blinking.
Open your Internet Explorer web browser.
7)Using a Static (fixed) IP, You may also connect remotely by typing in the IP address of the SSC21WEB, Such as
http://192.168.1.200
* Note : HTTP Port
Set the port to be used when connection to SSC21WEB in internet Explorer and receive Necessary files for the image transmission.
The port setting is used for various network configuration or a particular port etc.
CAUTION
A port number is reserved for TCP port and HTTP port setting.
Default values should not be changed.
However, if the IP Router is used in a network environment, input proper values with reference to the IP Router manual.
If the SSC21WEB is using a Router, you may also connect remotely by typing In the WAN IP Address of the Router and the HTTP port assigned to the SSC21WEB.
(here you must type in the port address even if it is the default “80”), such as http://192.168.1.200 :80
