O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct sig- nal source (ANT, STD, HRC, IRC). See steps 1~2 on pre- vious page.
Press the Menu button. Press the Down 
button to select “Channel”, then press the ENTER(
) button
2
Press the Down 
button to select “Auto Program”, then press the ENTER(
) button.
3
The TV will begin memorizing all of the avail- able channels.
After all the available chan- nels are stored, the Auto program menu reappears. Press the Menu button to exit.
▼ | The TV automatically cycles |
through all of the available chan- nels and stores them in memory. This takes about one to two min- utes.
Adding and Erasing Channels (Manual Method)
1
Use the number buttons to directly select the channel that will be added or erased.
2
Press the Add/Erase button:
Repeatedly pressing this button will alternate between “Added” and “Erased.”
Press the Menu button to exit.
You can view any channel (including an erased channel) by using the number buttons on the remote control.
CHAPTER THREE: TV OPERATION 3.9
