Samsung ST54T6 ST62T6 manual Adjust Red Convergence

O P E R AT I O N

Adjust Red Convergence

4

While “Red” is highlighted, press the ENTER() button: A crosshair pattern will appear on the screen. After moving the cursor to the position you want to adjust using the Up/Down/Left/Right buttons on the remote control, adjust Red Convergence by pressing the

CH and VOL +/- buttons.

5

If a horizontal red line is visible, use

CH buttons to move the line so that it is superimposed on the hori- zontal center-line (i.e., make a single horizontal line that is as white as possible.)

6

If a vertical red line is visible, use the VOL +/- buttons to move the line so that it is superimposed on the vertical-center line (i.e., make a sin- gle vertical line that is as white as possible.)

7

For ‘Blue’ adjustment, do the same as the above.

After the red convergence is correctly adjusted, press Menu to exit all the menus.

CHAPTER THREE: TV OPERATION 3.5