Samsung ST54T8PC Side Panel Jacks, ´ Video Input jack, Audio Input jacks, ¨ S-VIDEO Input jack

Y O U R N E W T V

Side Panel Jacks

You can use the side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.8.)

ŒPERFECT FOCUS

Press to adjust for the optimum picture set in the Factory.

´ VIDEO INPUT jack

Use to connect a video signal from a camcorder or a video game.

ˇ AUDIO INPUT jacks

Use to connect the audio signals from a camcorder or video game.

¨ S-VIDEO INPUT jack

Use to connect an S-Video signal from a camcorder or a video game.

Using the Component Shelf

You can place a VCR, a DVD player, etc. on the Component Shelf.

ST47W3PC / ST55W3PC / ST65W3PC

1

Press the symbol “ “ in the center of the Component Shelf door.

2

As shown in figure below, hold the center of door and lift it up.

➔

3	4
After placing a com-	Shut the door by
ponent on the shelf,	pressing the “ “
hold the center of door	symbol.
and pull it down as
shown in figure below.

Note: When placinga component on the shelf, make sure it is no more than 5 inches tall and leave one inch of space from the front and sides for ventilation.

ST54T8PC / ST62T8PC

1

Hold the center of the door and lift it up in the direction of arrow.

2

After placing a component you have in the display deck, hold the center of the door and pull it down.

Note: You should display only the component that is within 126mm high. When displaying a component in the display deck, please space it out 30mm from the front, 20mm from either end.

1.3 CHAPTER ONE: YOUR NEW TV