Samsung ST55W3PC, ST65W3PC manual Adjust Red Convergence, If a horizontal red line is visible, use

O P E R AT I O N

Adjust Red Convergence

4

While “Red” is highlighted, press the VOL + button: A crosshair pattern will appear on the screen. After moving the cursor to the position you want to adjust using the number buttons 2(up), 4(left), 6(right), 8(down) on the remote control, adjust Red Convergence by pressing the VOL +/ VOL -/CH /CH buttons.

5

If a horizontal red line is visible, use

CH and CH buttons to move the line so that it is superimposed on the horizontal center-line (i.e., make a single horizontal line that is as white as possible.)

6

If a vertical red line is visible, use the VOL + and VOL - buttons to move the line so that it is superim- posed on the vertical-center line (i.e., make a single vertical line that is as white as possible.)

7

For ‘Blue’ adjustment, do the same as the above.

After the red convergence is correctly adjusted, press Menu to exit all the menus.

CHAPTER THREE: TV OPERATION 3.5