1312
USER’S MANUAL
MOUNTING GUIDE
Wall mountable using two methods:
1) Using the 200 mm pre-cut holes
2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD
monitor to the wall.
Monitor
Pad Arm
Wall
D-SUB CONNECTOR PIN ASSIGNMENTS
Pin 1 RED VIDEO Pin 9
Pin 2 GREEN VIDEO Pin10 SIGNAL CABLE DETECT
Pin 3 BLUE VIDEO Pin 11 GROUND
Pin 4 GROUND Pin 12 SAD(for DDC)
Pin 5 GROUND Pin 13 H-SYNC.(or H+V SYNC.)
Pin 6 RED GROUND Pin 14 V-SYNC
Pin 7 GREEN GROUND Pin 15 SLC(for DDC)
Pin 8 BLUE GROUND
1. POWER CORD 2. USER’S MANUAL 3. PC cable 4. Adaptor
5. Remote Control 6. Batteries 7. Wall mount (Option) 8. Rack mount (Option)

• PIN ASSIGNMENTS

• ACCESSORY

D-SUB
USER’S MANUAL
3. OSD Tone
4. Blue Screen
5. Key Lock
Press the up( ) / down( ) button to select the OSD
tone menu.
Press the right( ) or ENTER button
Press the up( ) / down( ) button to select the
desire OSD Tone.
Press the MENU button to save.
Press the up( ) / down( ) button to select the blue
screen.
Press the right( ) or ENTER button.
Press the up( ) / down( ) button to select on or off.
Press the MENU button to save.
Press the up( ) / down( ) button to select the key
lock menu.
Press the right( ) or ENTER button
Press the up( ) / down( ) button select on or off
Press the MENU button to save.