Samsung SVR24JP Troubleshooting Contd Daily Checks, Turn on the VCR power, Rewind a little, Day

TROUBLESHOOTING (CONT'D)

DAILY CHECKS

Trouble	Checks and adjustments
The tape cannot be inserted.	• Check to see whether the power plug is inserted into
	the wall outlet.
	• Check to see whether the tape has already been
	inserted.
	• Insert the tape with the tape window facing up. (Refer to
	page 21).
The tape cannot be ejected.	• Check the power is turned on. If it is turned off, press
	the POWER button, and then press the eject button.
No program recording.	• Check to see whether the program recording input is
	properly set.
	• Check to see whether the current time is properly set.
	• Check to see whether the power is turned off.
	• Check to see whether the	is turned on the display.

This video is designed for use on a consistent basis therefore, please check the VCR condition before use, daily.

•When there is any abnormal operation or trouble of the VCR during daily checking, take appropriate actions referring to "trouble shooting" section on pages 39~41.

•If the abnormal operation or trouble remains unresolved, pull out the power cable, and then contact your dealer.

Daily checks

1 Turn on the VCR power

•Check to see whether there is good quality picture on the TV monitor.

•Check to see whether the time and date are correct.

2	W.		Rewind a little of
	RE	F
		F
			the tape recorded
			on the previous

day.

No editing with other equipment.	• Check to see whether proper connections are made.
The record button does	• Check for reserved recording. You need to press the
not function.	power button only.
	• The button cannot be pressed when the REC LOCK
	switch is "ON". (If you want to enter the button place the
	REC LOCK switch in the "OFF", and then press the
	button.
Playback picture is noisy.	• Press the "TRACKING" button for adjustment. If there is

3 PLAY

Press the PLAY button for playback.

•Check to see whether there is any problem

during playback.

•Check to see whether the recorded time and date are properly set.

no improvement, clean the head using the cleaning

tape.

• If there is any other problem contact service center.

4	Set the TIME MODE
	TIME MODEto "L3H".

5 In the case of too much noise on the screen.

• Clean the Head using cleaning tape.

ANCE

MAINTEN-

41 42