RECORDING | Set before Recording |
| Check to make sure of |
| current time |
| • For program recording current time must be |
| correct. |
| • If you have not set the current time yet, refer |
| to the section on setting time and date |
| (Refer to 13 page). |
• The tape can be recorded over again.
Prevention tab
Without the tab in place• The tape cannot be recorded over unless the tab is replaced by a piece of scotch tape.
Scotch tape
REFERENCE
Condensation
•If the video is moved from a cool to a warm place suddenly, installed in a humid place or exposed to cold air from an air conditioner, water drops may be generated on the video head due to the abrupt change in temperature.
Using the video in this state may cause a malfunction in this product or the tape.
If the video is moved from a cool to a warm place, plug the power cord in, press the power button and maintain the ON state for 1~2 hours before using.
RECORD LOCKING
This unit features a recording safety function and other various recording functions for
|
| Selecting | Operating | Description of | ||
|
| method | method | operation | ||
|
|
|
|
|
|
|
| When you want to | • Press the REC LOCK | • Pressing the REC LOCK button to | ||||
| secure recording | button to set "REC | begin REC LOCK mode. | ||||
|
|
|
|
| LOCK" | REC LOCK lamp will be on. |
|
|
|
|
|
| • No buttons can be entered in the |
|
|
|
|
|
| REC LOCK mode except the |
|
|
| OFF |
|
| RESET button. |
|
|
|
|
| ||
|
|
|
|
| ||
| REC LOCK |
|
| • The recording continues even | ||
|
|
|
| |||
|
|
|
|
|
| after the power restore. |
|
|
|
|
|
|
|
• Press the REC LOCK | • REC LOCK lamp will be off. |
| button again. |
|
OFF
REC LOCK
Operations when the tape ends during recording*Repeat record after automatic rewind.•When REPEAT ON is selected on the menu (However, when even one alarm recording is made the VCR will eject the tape and power on).
*Power on after tape is ejected•When reaching the end of tape except repeat recording after automatic rewind.RECORDING
27 | 28 |