TROUBLESHOOTING(CONT.D)

TROUBLESHOOTING (CONT'D)

The picture quality is poor with a lot of
noise•Check to see whether the tape is recorded by another VCR.•Check to see whether the head is dirty.

•Press the "TRACKING" button on the front panel of the video for adjustment or clean the head using the cleaning tape.

Won't Eject

•Press power button then eject button after VCR

first turns on.

the programmed

recording

is

• Check to see whether

 

 

 

 

 

 

set.

 

 

 

Trouble

Checks and adjustments

 

 

 

 

The tape cannot be inserted.• Check to see whether the power plug is inserted into

 

the wall outlet.

 

 

 

 

• Check to see whether the tape has already been

 

inserted.

 

 

 

 

• Insert the tape with the tape window facing up. (Refer to

 

page 21).

 

 

 

 

 

The tape cannot be ejected.• Check the power is turned on. If it is turned off, press

 

the POWER button, and then press the eject button.

 

 

No program recording.• Check to see whether the program recording input is

 

properly set.

 

 

 

 

• Check to see whether the current time is properly set.

 

• Check to see whether the power is turned off.

 

• Check to see whether the

 

 

is turned on the display.

 

 

 

 

 

No editing with other equipment.• Check to see whether proper connections are made.

 

 

The record button does• Check for reserved recording. You need to press the
not function.power button only.

 

 

 

 

• The button cannot be pressed when the REC LOCK

 

switch is “ON”. (If you want to enter the button place the

 

REC LOCK switch in the "OFF", and then press the

 

button.

 

 

 

 

 

Playback picture is noisy.• Press the "TRACKING" button for adjustment. If there is

 

 

 

 

Won't Timer

 

 

 

 

 

 

 

 

record

 

 

• Make

sure

timer recording

is set

 

19~20

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

properly

 

that the current time

is

 

• Check

to see

13

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

correct on the VCR

 

 

 

• Check if power

is off.

 

 

.

 

 

 

 

• Make sure "

 

"

indicator

is lit on the front panel

 

 

 

 

 

 

 

 

 

no improvement, clean the head using the cleaning

tape.
•If there is any other problem contact service center.

ANCE

MAINTEN-

41

42