Samsung SW65V5WFP/YL, SW75V5WFP/YL Assembling the RAT Protection Panel, HOW to PUT the Detergent

ASSEMBLING THE RAT PROTECTION PANEL

1.Insert the rat protection panel to the assembling hole on back side to the end.

Leg lock hook of shutter

Label

2.For easy to insert the protection panel should push to in front a little.Next,insert the rat protection panel from back side to the end.

2.Check the rat protection panel was inserted into washing machine or not.

4.Fix screw(option) between the rat protection panel and base of washing machine to closely.

HOW TO PUT THE DETERGENT IN

1. Open the detergent box by pulling in the direction of the arrow as shown in the figure and then put the powder detergent in the detergent box.

2.Put in one-time amount of detergent evenly so the detergent may not brim over the box.

HOW TO ADD THE FABRIC SOFTENER

Slide and open the cover in the direction of the arrow, insert the rinse detergent, and slide and close it in the reverse direction.

•When a proper amount (one time does) of fabric softener is stored in the softener inlet, it is automatically put in at the last rinsing cycle.

• Do not use detergent, bleach or starch into the Softener Inlet.

• Using too much softener may produce unsatisfactory results.

•Do not open the lid during the Spin Dry cycle. If added too early, its effectiveness will decrease.

•Do not leave the softener into the Softener Dispenser for a long time. Because softner became stiff.

WATER SUPPLY CONNECTOR FILTER

1.Pull out the filter and wash well.

2.Pull in the filter and connect the hose to the inlet water valve tightly.

3.Check if there isa leakage. Note to tighten up the connector.

CLEANING THE FILTER

1.Push the upper part of the Magic filter and pull in. 2. Open the cover as shown in the figure.

3. Clean the Magic filter.	4. Close the cover and insert the lower part of the
	filter in the basket first and then push the filter
	with “click” sound.
	installation & maintenance_13

SW75V5W-02596J-02_EN.indd 13

2012-05-16 �� 11:58:41