installation & maintenance

Assembling the rat protection panel (option)

Tilt the washer a little and lift up the panel until it clicks, finally fix the panel with screw to the base as shown in the figure.

Rear-side

1.Insert the rat protection panel to the assembling hole on back side to the end.

2.If you have difficulty inserting the panel lift up the washer a little and insert it.

How to connect the drain hose (option)

IN CASE OF PUMP-DRAINED WASHER

cap-hose

Take out the cap-hose and connect the

Be sure to join tightly the drain hose into the

outlet-hose.

drainoutlet on the back of the machine.

 

90~100cm

Be sure to join tightly the drain hose into

Install the drain hose in the position of about

the drain-outlet on the side of the machine.

90~100cm above the ground.

18_installation & maintenance

SW70W9XFP-02961E-01_EN.indd 18

 

 

2012-12-18 �� 7:09:37