installation & maintenance
Water supply connector filter
1.Pull out the filter and wash well.
2.Pull in the filter and connect the hose to the inlet water
valve tightly.
3.Check if there is a leakage.
Note to tighten up the connector.
Cleaning the filter
Clean the filter net often to keep the washer clean.
1.Push the upper part of the Hygiene filter and pull in.
2.Open the cover as shown in the figure.
3.Clean the Hygiene filter.
4.Close the cover and insert the lower part of the filter in the basket first and then push the filter with “click”
sound.
22_installation & maintenance
|
| ||
|
| ||
|
|
|
|