Samsung WA15W9QEP/YAS manual Case of General Washer, How to change the drain hose direction

IN CASE OF GENERAL WASHER

1.After pressing the joint ring, insert to the drain hose.

2. After directing the drain hose to a drain, join to the drainoutlet of the washing machine.

drain-outlet

3.Be sure to join them tightly by pressing the joint ring and

pushing it into the drain-outlet.

• The length of drain hose is adjustable so that you can extend the length appropriately.

How to change the drain hose direction

•The handle of joint ring is pressed to pull out the drain hose. Change the direction of the drain hose and follow the above

guideline again.

CAUTIONS WHEN INSERTING THE DRAIN HOSE

Less than 3 m

1.Don’t exceed more than 3m when the 2. Be careful to drain water out at the end of

drain hose is used by connecting with	the drain hose.
other hoses.

Less than 3 m

Less than 5 cm

3.The doorsill shoudn’t be more than 5cm. 4. Don’t install the drain hose underneath the wash machine.

&maintenance 03installation

installation & maintenance_19

SW70W9XFP-02961E-01_EN.indd 19

2012-12-18 �� 7:09:37