Connecting the SWA-8000S with Soundbar
cBefore connecting to the Wireless Receiver Module, connect your subwoofer first.
cUse the speaker cable to connect the wireless receiver module to the speakers.
cPlug the Power cord into a power outlet. The LED turns on.
1.Check the Soundbar is in Power Off status, and press the 
(Mute) button on your remote control for 5~6 seconds until the “ID SET” message appears on your Soundbar display.
2.Turn on your Soundbar when the link indicator (Blue LED) on the
3.Turn on your Soundbar with the “power” button on your remote control and wait for a while. They are completely connected to each other if you can see the LINK LED indicator is continuously lit (in Blue).
cIf the Wireless Receiver Module is not linked to your Soundbar (displaying the LED indicator in Red), connect them as follows.
1.Check the Soundbar is in Power Off status, and press the 
(Mute) button on your remote control for 5~6 seconds until the “ID SET” message appears on your Soundbar display.
2.Press the ID SET button on the back of the Wireless Receiver Module with a sharp pin for 5~6 seconds until the LINK LED indicator blinks (in Blue).
3.Turn on your Soundbar with the “power” button on your remote control and wait for a while. They are completely connected to each other if you can see the LINK LED indicator is continuously lit (in Blue).
cOnce connected, your Soundbar and the Wireless Receiver Module are automatically reconnected even after you turned them off and then on.
Compatible Models
| ||||
|
cThe model list is subject to change without further notice.