2. Check the standby status after plugging into an electrical outlet
Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, refer to step 7 on page 10.
POWER
L | R |
|
|
| STANDBY |
SURROUND SPEAKERS OUT | LINK | |
SPEAKER IMPEDANCE : 3Ω | ||
ID SET 
LINK 
Blue blinking
POWER
3. Turn off the Soundbar’s remote control
Turn off the Soundbar using the Soundbar’s remote control or by pressing the 
(Power) button on the main Soundbar unit.
OFF
•• The image of the Soundbar may differ from your Soundbar, depending on the model.
