UNO-LRC1 REMOTE CONTROL WITH CAV6.6/CAM6.6
UNO-LRC1 Remote Control Operation
Turning the unit on
The tuner is power managed by the CAV6.6 or other
Selecting the desired tuner
To select a tuner, push and choose the source number preassigned to Tuner 1 (XM1) or Tuner 2 (XM2), or use the UNO numeric source inputs at the bottom of the
Selecting an XM Mode
Push , , ,or to toggle
between XM operating modes.
Exiting an XM Mode
Press or to exit XM operating mode menu.
Selecting a Bank
To select a bank, press and hold for bank up
or for bank down.
Recalling a Memory Preset
Press and or and to scroll through a loop of all the memory presets for the cur- rently selected bank. Only configured presets will be displayed.
Mute
Press the button to mute/unmute the tuner audio output.
Signal Strength mode
Press and hold and release. The display shows
the signal strength rating. To exit press .
Selecting the desired channel
Use the Channel and or and
for manual tuning. To move quickly through the channels, press and hold the button for more than
1.5seconds. To directly select a channel, enter the three- or
23