3.After installing driver, shut down your computer and insert card. And power on the computer.
4.The system recognize the Wireless LAN Card.
5.The other procedures are same to 7~15 of < Method 1 - Inserting card first >
Cf.) The third method :
You can combine ‘Method 1’ with ‘Method 2’. In other words, after inserting card into the computer, you can install driver and utility by using the installshield instead, not by the inf file. In case of Windows 2000 and Windows XP, system will recognize the card automatically during installation .
Notice that if you install a card after removing it in a Device Manager, you have to mark the check box(“Do you want to scan for hardware changes?”). The function is same to the “Refresh” in ther Device Manager.
3.3 Installation Procedure of Windows ME
Please follow the following steps one by one to install the MiniPCI/PCI Card successfully.
<Method 1 - Inserting card first >
1.Insert the MiniPCI/PCI Card into the slot of your computer.
2.Power on your computer and allow Windows ME to load fully.
3.“Add New Hardware Wizard” appeared and the system looks for “PCI Network Controller”. Check if “Search for the best driver for your device(recommended)” is slected. Insert the MagicLAN Installation CD into the
20
