Samsung TL105 manual Starting the Multi Slide Show, Start the Multi Slide Show, Selecting Images

Starting the Multi Slide Show ( )

Images can be displayed continuously at pre-set intervals.

You can view the Multi Slide Show by connecting the camera to an external monitor.

1.Press the play mode button and press the MENU button.

2.Press the Up / Down button and select the [Multi Slide Show] menu tab and press the OK button.

Start the Multi Slide Show

The Multi Slide Show can start only in the [Start] menu.

1.Use the Up / Down button to select the [Start] menu and press the Right button.

Selecting Images

You can select image to view
1. Use the Up / Down button to select the		Start
[Images] menu and press the Right		Images	All :All
button.		Interval	Date:1 sec
		Music	:Off
2. Select a desired sub menu by pressing			Select
		Effect	:Off
the Up / Down button.
[All]	: All images saved on the
		Back	Set
	Memory are played back. Press the OK button to
	save the configuration.
[Date]	: Images taken in a specified date are played back.

2.Select a desired sub menu by pressing the Up / Down button.

[Play] : The Multi Slide Show is closed after one cycle.

[Repeat] : The Slide show is repeated until cancelled.

Start	Play
Images	:All
	Repeat
Interval	:1 sec
Music	:Off
Effect	:Off
Back	Set

Press the OK button to save the configuration. [Select] : Play only the selected images. The selected image

can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will

3.Press the OK button and the slide show will be started.

-To pause the slide show while playing it back, press the OK button again.

-Pressing the OK button again will cause the Multi Slide Show restart.

-To stop playback of the Multi Slide Show, press the OK button, and then press the Left or Right button.

be saved as [Select2] automatically.You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button to save the configuration.

3.Select [Play] or [Repeat] in the [Start] menu to start the multi slide show.

79