INSTALLATION

English - 21

Connecting a Digital TV Set-Top Box

The rear panel jacks on your TV make it easy to connect a set-top box to your TV.

Connecting to Y, PB, PR

1
Connect a coaxial cable to the
ANTENNA IN terminal on the set-top
box.
2
Connect a set of audio cables between
the “COMPONENT IN 1 (L, R)” (or
“COMPONENT IN 2 (L, R)”) jacks on the
TV and the AUDIO OUT jacks on the
set-top box.
3
Connect a set of video cables between
the “COMPONENT IN 1 (Y, PB, PR)” (or
“COMPONENT IN 2 (Y, PB, PR)”) jacks
on the TV and the VIDEO OUT (Y, PB, PR)
jacks on the set-top box.
The connections for a typical set-top
box are shown.
For detailed information, refer to the
set-top box instruction manual.
TV Rear Panel

Connecting to HDMI (High Definition Multimedia Interface)

Connect an HDMI cable between the
“HDMI IN” jack on the TV and the
HDMI OUT jack on the set-top box.
Please check that the HDMI source is
powered on. If not, you can not select
“HDMI” in the “Source List” on-screen
menu.
TV Rear Panel
AA68-03652A-00Eng 5/30/05 9:38 AM Page 21