I N S T A L L AT I O N
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 14~17).
TV Rear Panel
1
Connect a coaxial cable between the “ANT 1 IN (Air)” terminal on the TV and the antenna out terminal on the VCR.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
2
Connect a set of audio cables between the “AV IN 1 (L, R)” (or “AV IN 2/3 (L, R)”) jacks on the TV and AUDIO OUT jacks on the VCR.
If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable.
3
Connect a video cable between the “AV IN 1 (VIDEO)” (or “AV IN 2/3 (VIDEO)”) jack on the TV and the VIDEO OUT jack on the VCR.
Refer to your VCR’s instructions for more information about how to view your VCR tape.
•Also, you can connect to “AV IN 4” on the side panel of TV.
