INSTALLATION
English - 22
Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a Camcorder to your TV. They allow

you to view the Camcorder tapes without using a VCR.

1
Locate the A/V output jacks on the
Camcorder. They are usually found on
the side or rear of the Camcorder.
2
Connect a set of audio cables between
the “AV IN 4 (L, R)” jacks on the TV and
the AUDIO OUT jacks on the
Camcorder.
If you have mono Camcorder, connect
L(mono) to Camcorderaudio out using
only one audio cable.
3
Connect a video cable between the
“AV IN 4 (VIDEO)” (or “S-VIDEO IN 2”)
jack on the TV and the VIDEO OUT jacks
on the Camcorder.
The audio-video cables shown here are
usually included with a Camcorder. (If
not, check your local electronics store.)
If your Camcorderis stereo, you need
to connect a set of two cables.
TV Side Panel
AA68-03652A-00Eng 5/30/05 9:38 AM Page 22