Cabletron Systems NBR-620 Free-Standing Installation, Connecting The Nbr To The Power Source

Connecting the NBR to the Power Source

3.3.3 Free-Standing Installation

For a free-standing shelf or tabletop installation, locate the NBR within 7 feet of its power source and with an unrestricted free surface area 21 inches wide, 18 inches deep and 6 inches high, as shown in Figure 3-10.

18 IN.

6 IN.

	21 IN.
NBR-620MULTI PORT BRIDGE ROUTER WITH LANVIEW®
	PORT F	PORT E
PORT D	PORT C	PORT B	PORT A

7 FT.

Figure 3-10 Free-Standing Installation

3.4 CONNECTING THE NBR TO THE POWER SOURCE

NOTE

The NBR has a universal power supply. This allows you to connect the NBR to power sources from 100 Vac to 125 Vac or 200 Vac to 250 Vac, 50/60 Hz.

Connect the NBR to the power source as follows:

1. Plug the power cord into a grounded wall outlet.

NOTE

It may take several minutes for the NBR to boot up. While booting, the NBR displays boot-up diagnostics through Local Management. Refer to the NBR-220,NBR-420, and NBR-620 Local Management Guide for additional information on how to connect and configure a Local Management console.

NBR-SERIES Installation Guide Page 3-15