Cabletron Systems NBR-220, NBR-420, NBR-620 manual Rack Mounting the NBR

Chapter 3: Installation

3.3.2 Rack Mounting the NBR

Install the NBR in a 19-inch rack as follows:

1.Remove four cover screws (two from each side) located along the front edges of each side of the NBR. See Figure 3-8.

2.Using the four 6-32 x 3/8-inch replacement flathead screws, attach the rack mounting brackets to each end of the NBR.

Rack Mounting

Brackets (2)

NBR-620MULTI PORT BRIDGE ROUTER WITH LANVIEW®

	PORT F	PORT E
PORT D	PORT C		PORT B	PORT A

1092_02

Screws (4)

Figure 3-8 Rackmount Brackets Installation

3.With the mounting brackets attached, position the NBR between the vertical frame members of the 19-inch rack and fasten it securely with the mounting screws. See Figure 3-9.

19-Inch Rack

NBR-620MULTI PORT BRIDGE ROUTER	WITH	LANVIEW®
			PORT F	PORT E
		PORT D	PORT C	PORT B	PORT A

Screws (4)

1092_13

Figure 3-9 Installing the NBR in the Rack

Page 3-14 NBR-SERIES Installation Guide