Cabletron Systems NBR-420, NBR-220, NBR-620 manual Attaching the Strain-Relief Bracket

Installing the NBR

•If a shelving unit is to be used, it must be able to support 30 pounds (13.6 kg) of static weight.

•The temperature for the selected location must be maintained between 5° and 40°C, and less than 10°C per hour temperature change.

3.3.1 Attaching the Strain-Relief Bracket

Attach the strain-relief bracket to the front of the NBR as follows:

1.Remove the strain-relief bracket and four 8-32 x 3/8-inch screws from the NBR installation kit.

Use only the appropriate screws to attach the strain relief. Use of longer screws may cause damage to the unit or electrical shock.

2.Attach the strain-relief bracket to the bottom of the NBR as shown in Figure 3-7.

Strain-Relief

Bracket

NBR-620MULTI PORT BRIDGE ROUTER WITH LANVIEW®

	PORT F	PORT E
PORT D	PORT C		PORT B	PORT A

Strain-Relief

Screws (4) 1092_12

Figure 3-7 Attaching the Strain-Relief Bracket

NBR-SERIES Installation Guide Page 3-13