QUICK SETUP DIAGRAM
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
| TURNTABLE |
|
|
| |
| AC |
|
|
|
|
| ADAPTOR |
|
|
|
|
POWER AMPLIFIER |
|
| |||
AUDIO OUT |
|
|
|
| |
R | L DIGITAL FADER 230V | 115V | AC IN~ | ON | POWER |
| OUTPUT START |
|
| OFF | |
CD PLAYER | |
AUDIO OUT |
|
R L | DIGITAL FADER |
| OUTPUT START |
TURNTABLE
230V 115V | AC IN~ | POWER |
ON
OFF
