Connecting an Amplifier/DVD Home Theater
TV Rear Panel
Amplifier/DVD Home Theater
1 2
Audio Cable (Not supplied)
➢Each external input source device has a different back panel configuration.
➢When connecting an external device, match the color of the connection terminal to the cable.
1.Connect Audio Cables between the AV OUT
When an audio amplifier is connected to the “AUDIO OUT
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Plug & Play Feature
When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
Plug & Play
Start Plug & Play.
OK
Enter | Return |
1.Press the POWER button on the remote control.
The message “Plug & Play” is displayed. It flickers for a little while and then Language menu is automatically displayed.
TV |
|
| Setup |
Plug & | Play |
| |
Language | : | English | |
Time |
|
| Español |
| Português | ||
|
| Français | |
Caption |
|
| |
|
|
| |
† More |
| ||
Move |
| Enter | Skip |
2.Press the … or † button to select the language, then press the ENTER button.
The message “Check antenna input.” is displayed.
➢If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.
Plug & Play
Check antenna input.
OK
Enter | Skip |
3.Make sure that the antenna is connected to the TV. Press the ENTER button.
The “Search” menu is displayed.
Continued...
