CHAPTERTWO: INSTALLATION 2.4
4
Connect a coaxial cable
between the ANTENNA
OUTterminal on the cable
box and the B–INterminal
on the A/Bswitch.
5
Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of the
TV.
INSTALLATION
Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable

TV system (according to the instructions on pages 2.1-2.3). Skip step 1if you have not yet

connected to an antenna or a cable system.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing.

Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B

switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usu-

ally channel 3 or 4.)

1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
ANTENNAIN terminal on
the back of the VCR.