CHAPTERTHREE: TV OPERATION3.9
OPERATION
Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,

“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-

ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear

next to the channel number.

1
Press the CH ▲or CH ▼ button
to tune to the channel that will
be labeled.
2
Press the MENUbutton to dis-
play the menu.
Press the CH ▼ button twice to
select “Channel”.
Press the VOL + button.
3
Press the CH ▼button five
times to select “Labeling”.
Press the VOL + buttonto begin
labeling. The left-most field will
be highlighted.
(Each label has four fields. See
top paragraph.)
4
Press the CH ▲or CH ▼button
to select a letter, a number, “*”,
or a blank. (Pressing the CH ▲
button results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼

Note: You cannot select

“Labeling” in the A/V mode.

5
Press the VOL+ button to switch
to the next field, which will be
highlighted. Select a second let-
ter or digit using the CH ▲and
CH ▼ buttons, as above.
Repeat the process to select the
last two digits.
Press the MENU button twice to set the label and clear the
menus from the screen.