2.5 CHAPTERTWO: INSTALLATION
INSTALLATION
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
terminal on the TV.
4
Connect a set of audio
cables between the
AUDIOOUT jacks on the
VCRand the AUDIO jacks
on the TV.
5
Connect a video cable
between the VIDEOOUT
jack on the VCR and the
VIDEO jack on the TV.
Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape.
Note: This figure shows the Standard Connector-jack panel. The actual configuration on your
TV may be different, depending on the model.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
If you have a mono (non-stereo) VCR, use the Y-connector (not supplied) to hook up
to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-
nect two cables.