Front panel and front USB
13.1.6Installing the On/Off button and the HDD activity
LED
Figure 144: Installing the On/Off button and HDD activity LED
ÊInsert the HDD activity LED in the direction shown until it snaps in place (1).
ÊInsert the On/Off button in the direction shown until it snaps in place (2).
ITake care of the orientation of the On/Off button. If it is installed in the other direction, it does not work properly.
ÊConnect the front panel cable to the system board connector Frontpanel (3).
ÊRoute the cable through the cable holder (4).
13.1.7 Concluding steps
ÊClose the front cage as described in section "Closing the front cage" on page 53.
ÊFollow all procedures described in section "Closing the server" on page 54.
228 | Upgrade and Maintenance Manual | MX130 S2 |
