Basic hardware procedures

4.2Opening the server

VCAUTION!

Before removing or installing covers, turn off the server and all peripheral devices. Also unplug all power cables from the outlet. Failure to do so can cause electric shock.

In order to comply with applicable EMC regulations (regulations on electromagnetic compatibility) and satisfy cooling requirements, the PRIMERGY MX130 S2 server must not run while the server cover is removed.

For further safety information, please refer to chapter "Important information" on page 31.

4.2.1Shutting down the server

VCAUTION!

For further safety information, please refer to chapter "Important information" on page 31.

IThis step is only required when upgrading or replacing non-hot plug components.

ÊInform the system administrator that the server will be shut down and put offline.

ÊTerminate all applications.

ÊVerify if your backup software solution requires preparative configuration before starting the procedure as described in section "Verifying and configuring the backup software solution" on page 61.

ÊRemove all backup and optical disk media from backup and optical disk drives as described in section "Removing backup and optical disk media" on page 60.

48

Upgrade and Maintenance Manual

MX130 S2

Page 48
Image 48
Fujitsu MX130 S2 manual Opening the server, Shutting down the server, Basic hardware procedures