Fujitsu MX130 S2 manual System board and components, Safety notes

12 System board and components

This chapter provides information on how to replace the system board and system board components as its CMOS battery and the Trusted Platform Module (TPM).

Safety notes

VCAUTION!

●Devices and components inside the server remain hot after shutdown. After shutting down the server, wait for hot components to cool down before installing or removing internal options.

●Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity. Always discharge static build-up (e.g. by touching a grounded object) before handling electrostatic- sensitive devices (ESDs).

●Do not touch the circuitry on boards or soldered parts. Hold circuit boards by their metallic areas or edges.

●For further information, please refer to chapter "Important information" on page 31.

In this chapter

●"Removing the CMOS battery" on page 201

●"Installing the CMOS battery" on page 202

●"Installing the TPM board" on page 204

●"Removing the TPM board" on page 209

●"Replacing the system board" on page 213

MX130 S2 Upgrade and Maintenance Manual 199