Before you start
2.3Tools you need at hand
When preparing the maintenance task, ensure that all required tools are available according to the overview below. You will find a list of required tools at the beginning of each procedure.
Screw driver / | Screw | Usage | Type | |
Bit insert | ||||
|
|
| ||
Phillips |
| Board, | M3 x 4.5 mm | |
PH2 / (+) No. 2 |
| (silver) | ||
hexagonal cross |
| Front USB | ||
SW5 / PZ2 |
|
| ||
|
|
|
| |
Phillips |
|
| UNC | |
PH2 / (+) No. 2 |
| HDD3, HDD4 | ||
hexagonal cross |
| (black) | ||
SW5 / PZ2 |
|
| ||
|
|
|
| |
TPM bit insert |
| TPM screw | REM 3 x 15 mm | |
Dedicated TPM |
| |||
| One way | (black) | ||
screw driver / |
| |||
| head |
| ||
TPM module |
| |||
|
| |||
fixing tool (for the |
| (black) | C176 | |
Japanese market) |
|
|
| |
|
|
|
| |
|
| 2.5 HDD | M3x 3.5 / 0.25 Nm | |
Phillips |
| (silver) | ||
| (on request | |||
PH1 |
| |||
|
| only) | C102 | |
|
|
| ||
|
|
|
| |
Torx Plus Size 6 |
| slimline ODD | M 2.0 x 2.5 / | |
Philips (+) No.00 |
| in additional | 0.2 Nm | |
silver |
| 5.25 inch | ||
For EMEA: Torx |
| bracket | ||
| C163 | |||
For Japan: Philips |
|
| ||
|
|
| ||
|
|
|
| |
Front Fan Rivets |
| System fan | ||
Pincer / Side |
|
|
| |
cutter |
|
|
| |
|
|
|
| |
Table 2: List of required tools and used screws |
|
| ||
MX130 S2 | Upgrade and Maintenance Manual | 27 |
