Fujitsu MX130 S2 manual Upgrade and Maintenance Manual 103

HDDs and accessible drives

VCAUTION!

Always replace dummy modules into unused drive bays to comply with applicable EMC regulations and satisfy cooling requirements.

7.8.4Concluding steps

Perform the following procedures to complete the task:

ÊInstall the 5.25-inch dummy cover as described in section "Installing 5.25- inch dummy cover" on page 110.

ÊFollow all procedures described in section "Closing the server" on page 54.

7.9Installing additional 3.5-inch HDD in 5.25- inch ODD/HDD bracket

7.9.1Required tools

●Preliminary and concluding steps: tool-less

●Installing a 3.5-inch HDD

– Phillips PH2 / (+) No. 2 screw driver

7.9.2Preliminary steps

Before installing a 3.5-inch HDD, perform the following steps:

ÊFollow all procedures described in section "Opening the server" on page 48.

ÊLocate the correct drive bay as described in section "Mounting order" on page 82.

ÊRemove the 5.25-inch dummy cover as described in section "Removing a 5.25-inch dummy cover" on page 113.

MX130 S2 Upgrade and Maintenance Manual 103