Main memory
10.1Basic procedure
–The system board is equipped with four memory connectors.
–The system has to be equipped with at least one memory module. Populate memory slot 1 first.
–Supported memory modules:
–Supported capacities: 1 GB, 2 GB or 4 GB
–Maximum amount of RAM: 16 GB
10.1.1 Memory sequence
–Populate memory slot 1 first.
–Within both channels, memory slot 1 must be populated prior to slot 2.
–If memory modules with different capacities are used:
–Install modules with higher capacities first.
–Within a channel, install modules in descending order of capacity.
–If memory modules with different speeds are used, the lowest clock rate applies for all DIMMs.
Slot 2, Channel B
Slot 4, Channel B
Slot 1, Channel A
Slot 3, Channel A
Figure 113: Memory overview
180 | Upgrade and Maintenance Manual | MX130 S2 |
