Fujitsu MX130 S2 manual Removing the ODD

HDDs and accessible drives

Figure 80: Removing the ODD

ÊPress the green locking (1) and pull the ODD out of its bay (2).

ÊInstall a new ODD in this bay.

7.20.4 Concluding steps

Perform the following procedures to complete the task:

ÊFollow all procedures described in section "Closing the server" on page 54.

ÊIf BitLocker functionality is used and has been disabled before starting the maintenance task, re-enable BitLocker as described in section "Enabling BitLocker functionality" on page 66.

144 Upgrade and Maintenance Manual MX130 S2