9 Expansion cards
This chapter provides information on how to install, remove or replace expansion cards.
Safety notes
VCAUTION!
●Do not damage or modify internal cables or devices. Doing so may cause a device failure, fire, or electric shock.
●Devices and components inside the server remain hot after shutdown. After shutting down the server, wait for hot components to cool down before installing or removing internal options.
●Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity. Always discharge static
●Do not touch the circuitry on boards or soldered parts. Hold circuit boards by their metallic areas or edges.
●If devices are installed or disassembled using methods other than those outlined in this chapter, the warranty will be invalidated.
●For further information, please refer to chapter "Important information" on page 31.
In this chapter
●"Installing expansion cards" on page 161
●"Removing expansion cards" on page 165
●"Mounting expansion card slot brackets" on page 173
MX130 S2 | Upgrade and Maintenance Manual | 159 |
