Important information

High humidity and airborne dust levels are to be avoided. Electric shocks and/or server failures may be caused by liquids such as water, or metallic items, such as paper clips, entering a drive.

Shocks and vibrations are also to be avoided.

Do not insert any objects other than the specified CDs/DVDs/BDs.

Do not pull on, press hard, or otherwise handle the CD/DVD/BD tray roughly.

Do not disassemble the ODD.

Before use, clean the optical disk tray using a soft, dry cloth.

As a precaution, remove disks from the ODD when the drive is not to be used for a long time. Keep the optical disk tray closed to prevent foreign matter, such as dust, from entering the ODD.

Hold CDs/DVDs/BDs by their edges to avoid contact with the disk surface.

Do not contaminate the CD/DVD/BD surface with fingerprints, oil, dust, etc. If dirty, clean with a soft, dry cloth, wiping from the center to the edge. Do not use benzene, thinners, water, record sprays, antistatic agents, or silicone-impregnated cloth.

Be careful not to damage the CD/DVD/BD surface.

Keep the CDs/DVDs/BDs away from heat sources.

Do not bend or place heavy objects on CDs/DVDs/BDs.

Do not write with ballpoint pen or pencil on the label (printed) side.

When a CD/DVD/BD is moved from a cold place to a warm place, moisture condensation on the CD/DVD/BD surface can cause data read errors. In this case, wipe the CD/DVD/BD with a soft, dry cloth then let it air dry. Do not dry the CD/DVD/BD using devices such as a hair dryer.

To avoid dust, damage, and deformation, keep the CD/DVD/BD in its case whenever it is not in use.

Do not store CDs/DVDs/BDs at high temperatures. Areas exposed to prolonged direct sunlight or near heating appliances are to be avoided.

36

Upgrade and Maintenance Manual

MX130 S2

Page 36
Image 36
Fujitsu MX130 S2 manual Important information