
Processors
Figure 124: Applying thermal paste
ÊApply a small streak of thermal paste (1.0 gram, see description above) to the center of the processor surface as shown.
VCAUTION!
Do not mix different types of thermal paste.
11.3.7Installing the processor heat sink
Refer to section "Installing the processor heat sink" on page 190 for installing the processor heat sink.
11.3.8 Concluding steps
Perform the following procedures to complete the task:
ÊFollow all procedures described in section "Closing the server" on page 54.
ÊIf available, update the system board BIOS to the latest version as described in section "Updating the system board BIOS" on page 62.
ÊIf BitLocker functionality is used and has been disabled before starting the maintenance task,
MX130 S2 | Upgrade and Maintenance Manual | 197 |